Top Background Image

How to Select a Watertight Cable for Underwater Equipment


Watertight cable selection starts with the underwater system, including the electrical circuits, mechanical loads and sealing interfaces. Selecting a jacket material or a model number first can leave pressure exposure, water migration and termination compatibility unresolved.

Define the exposure before choosing a model

Record the working depth and the corresponding design pressure basis. State whether pressure values are gauge or absolute, and distinguish normal operation from qualification testing. Include water type, temperature, exposure duration and the expected number of deployment cycles.

Depth alone is not a complete cable specification. The proposed construction must also match the circuit, movement and sealing requirements at that location.

Specify power and signal requirements separately

For power circuits, provide voltage, continuous and peak current, cable length and allowable voltage drop. For signal circuits, identify the interface, transmission length, shielding needs and any required impedance or bandwidth.

Where power and signal circuits share a cable, define the separation and shielding arrangement rather than assuming that a general-purpose multicore construction will support the required transmission quality.

Decide what must happen after water enters

A project may require resistance to external water, limitation of longitudinal migration or both. State whether the acceptance test uses an intact specimen, a deliberately damaged specimen or an exposed cable end. Include the allowed leakage or migration criterion.

[Habia’s water-blocking guidance]shows why the required level of protection influences the internal construction. A water-blocking feature should be evaluated against the path it is intended to protect.

Check mechanical and termination requirements

Describe suspended length, handling tension, repeated bending, torsion, abrasion and retrieval conditions. Request separate static and dynamic bend limits where both are relevant. Define how any strength member will be anchored at the termination.

The jacket must also be compatible with the intended connector, overmold or sealing system. Material names alone do not establish adhesion, sealing performance or suitability for a specific chemical exposure.

Use the Jiangsu Yuhang model groups as an enquiry starting point

Classification

Models listed in the supplied product classification

Transverse watertight cable

ZSMEFP-4, ZSMYJFP-4, ZSMYJPJP-6, ZSMEFP-8, ZSMYJFP-8, ZSMYJPJP-8, ZSMFPJ

Longitudinal watertight cable

JSMEFP-6, JSMYJFP-6, JSMYJPJP-6, JSMEFP-8, JSMYJFP-8, JSMYJPJP-8, JHMH-6


Confirm the meaning of each suffix with the agreed specification. These model strings should not be decoded into an assumed pressure rating, conductor count or material combination.

Send a circuit schedule, environmental brief and termination drawing with your enquiry. They provide a stronger basis for selection than a model name alone.



Quick Inquiry